Setup Multiple Machines In A Sequence With Dmx - Magicfx SWIRLFAN II User And Installation Manual

3.4

SETUP MULTIPLE MACHINES IN A SEQUENCE WITH DMX

DMX IN DMX OUT
PowerCon TRUE1 male
POWER IN POWER OUT
1. Connect a power link cable to the power output.
2. Connect the other end to the power input of the next machine.
3. Connect a DMX cable to the DMX output.
4. Connect the other end to the DMX input of the next machine.
5. Power up the machine.
6. Use the buttons or a RDM controller to assign DMX addresses, see Chapter 1.
7. Repeat step 1 – 5 for each subsequent machine.
CAUTION
DMX
5-pole male
POWER
Always plug in a DMX Terminator into the DMX output of the final
unit in the control sequence. Using a DMX Terminator improves
signal reliability.
MAGICFX® SWIRLFAN II — User and Installation Manual
5-pole female
DMX IN
PowerCon TRUE1 female
POWER IN
DMX OUT
POWER OUT
17