Identification Of Parts - G21 INTENSE Series Manual

• The selected time will register in 5 seconds and the system will automatically revert back to
display the previous humidity setting.
• When the Auto start and Auto stop times are set, within the same program sequence, TIMER ON
OFF indicator lights illuminate identifying both ON and OFF times are now programmed.
• Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 will cancel the Auto
Start/Stop function.
• When LED display window displays the code of P2, the Auto Start/Stop function will also be
cancelled.

Identification of parts

Dryer mode
• the unit can make the MAX dehumidification
function when it is under the Dryer mode. The fan
speed is fixed at high fan speed. The humidity level
is automatically controlled according to the actual
room humidity. The unit will quit dryer mode after
a maximum 10 hours operation.
Note:
• The Dryer mode must be operated in a close
room, do not open the door and window.
• To make the best effective dehumidification,
please first dehydrate the wet clothes.
• Make sure to direct airflow at the wet clothes.
• For thick and heavy wet clothes may not get the
best effective dehumidification.
Caution
• Do not cover the air outlet of the unit with clo-
thes. It may cause excessive heat, fire or failure
of unit.
• Do not place the wet clothes on the top of the
unit and do not make the water drip into the unit.
It may cause electric shock, creepage or failure of
unit.
30~50cm
30~50cm
Allow 30-50 cm of distance
on the top and right side of
the unit to the wet clothes.