Advertisement
Adjust the trimming to progressively shorter settings until you reach
the desired length of beard. You may wish to set the trimming guide
attachment to cut closer near the ear and down under the chin. When
the trimming guide is removed, it will remain at the last length setting
until you change it.
Always be sure the trimming guide is locked solidly into the desired
position before you start to trim.
3. To cut the outline of your beard, remove the trimming guide. Starting
under your chin and working back toward your jawbone and ears, cut
the outer perimeter underneath the jawbone. Continue the line all the
way up to the ears and hairline.
4. Accentuate your beard line by using the trimmer in a downward motion.
Start at the line you've created and, working from the chin back toward
the ears, trim the area right under your beard line.
5. Define the upper part of your beard using the same technique.
6. For a neater finished look, replace attachment blade to the detail
attachment. Use this blade for fine, detail trimming anywhere it is
needed, such as the sideburns near the ears, goatees e.t.c.
USING GUIDE COMBS
To attach the guide combs, hold the comb with the teeth up. Snap guide
comb attachment firmly to the bottom of the trimmer blade.
TRIMMING WITH GUIDE COMBS
The stubble guide has 1 bar, the medium cut attachment has 2 bars and the
long cut attachment has 3 bars. These attachments are ideal for blending,
tapering and defining beards, as well as for achieving a close trim stubble
look around the face. To use the attachments, go with the hair direction. To
achieve closer looks, go against the hair direction.
TRIMMING NOSE HAIR
Make sure the nasal passages are clean. Slowly move the detailer in and
out of each nostril, no more than ¼ inches deep.
TRIMMING EAR HAIR
Make sure the outer areas of the ears do not contain any wax. Hold the ear
flat with one hand and carefully insert detailer no more than ¼ inches into
the outer ear.
Lithium Ion Triple Play
7
Hide quick links:
Advertisement
