Speaker; Speaker Mounting Clasp; Speaker (M3) - Panasonic TH-65BFE1W Operating Instructions Manual

Mounting sequence of the speaker
Mount the speaker (supplied).
A cross slot screw driver is required for assembling. Therefore, arrange it in advance.
1
As shown in the figure below, mount the speaker on the display.
Fix the speaker with 2 speaker mounting clasps and 4 speaker mounting bolts (supplied).
Note
● Speaker mounting clasps are assembled with the speaker and supplied with it.
■
In the case of lateral placement
■
In the case of vertical placement
Bolts for mounting the speaker
(M3)
*Fix the opposite side in the symmetric position.
Bolts for mounting the speaker (M3)
*Fix the opposite side in the symmetric position.

Speaker

Speaker
17
English