Synchro Start Cd Recording; Recording From The Radio; Recording From The Aux; Recording Timer - Philips MC-20/25 User Manual

Synchro Start CD recording

1
Select CD source.
2
Insert a disc and if desired, programme track
numbers.
3
Press OPEN to open the tape door.
4
Insert a suitable tape into the deck and close the
tape door.
5
Press RECORD to start recording.
➜ COPY or RECORD is displayed briefly and
is shown during recording.
RECORD
➜ Playing of the disc programme starts
automatically from the beginning of the disc/
after 7 seconds. It is not necessary to start the
CD player separately.
¶ If you wish, press CLOCK once to monitor the
counter display.
To stop recording, press STOP 9.
6

Recording from the Radio

1
Tune to the desired radio station (see Tuning to
radio stations).
2
Press OPEN to open the tape door.
3
Insert a suitable tape into the deck and close the
tape door.
4
Press RECORD to start recording.
➜ RECORD is displayed briefly and
shown during recording.
¶ If you wish, press CLOCK once to monitor the
counter display.
To stop recording, press STOP 9.
5
Recording from AUX
1
Select AUX source.
2
If necessary, prepare the additional appliance for
recording.
3
Press RECORD to start recording.
➜ RECORD is displayed briefly and
shown during recording.
¶ If you wish, press CLOCK once to monitor the
counter display.
To stop recording, press STOP 9.
4
pg 001-021/MC20/22-Eng

Recording Timer

To record from the radio, you will need to use a
preset radio station and to set a start (ON) and
finish (OFF) time.
1
Insert a suitable tape into the deck.
➜ If desired, select tape reverse mode option.
2
Select the preset radio station to record from.
3
Press TIMER ON•OFF for more than 2
seconds.
➜
TIMER
4
Press SELECT SOURCE repeatedly, or turn
VOLUME clockwise until REC TUN source is
displayed.
5
Press TIMER ON•OFF to confirm the source.
➜ SET ON TIME is displayed,
clock digits for the hours flash.
6
Turn VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
7
Press TIMER ON•OFF again.
➜ The clock digits for the minutes flash.
8
Turn VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
9
Press TIMER ON•OFF to confirm the ON
start time.
➜ SET OFF TIME is displayed,
clock digits for the hours flash.
is
RECORD
10
Repeat steps 6-8 to set the finish time.
11
Press TIMER ON•OFF to confirm the timer
settings.
➜
TIMER
now set.
is
RECORD
17
Tape Recorder
flashes and a source is displayed.
and the
TIMER
and the
TIMER
is shown and the recording timer is
12/7/00, 1:31 PM
3140 115 27782
17