Compact Disc; Playing A Disc; Selecting A Different Track; Finding A Passage Within A Track - Philips MC-20/25 User Manual

Compact Disc

STANDBY
ON
SELECT
SOURCE
DBB DSC
INTERACTIVE SOUND
iR SENSOR
STOP PRESET
REPEAT TUNING RECORD
REV MODE
BAND
PREV
IMPORTANT:
The lens of the CD player should never be
touched.
X

Playing a disc

This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
¶ CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1
Select CD source.
2
Press OPEN•CLOSE on the top
of the system to open the CD
compartment.
➜ OPEN is displayed when you
open the CD compartment.
3
Insert a disc with the printed side
facing up and press down on OPEN•CLOSE
to close the CD door.
➜ READ is displayed as the CD player scans the
contents of a disc, and then the total number of
tracks and playing time are shown.
Press PLAY•PAUSE 2; (on the remote
4
control 2) to start playback.
➜ Current track number and elapsed playing
time of the track are displayed during disc
playback.
To interrupt playback press PLAY•PAUSE 2;
5
(on the remote control SIDE/;). Press
PLAY•PAUSE 2; (on the remote control 2)
again to resume play.
12
pg 001-021/MC20/22-Eng
CD
PROGRAM
PROGRAM
TIMER
ON • OFF
INCREDIBLE SURR.
VOLUME
PLAY•PAUSE
RDS
CLOCK
TUNING
SHUFFLE
SIDE A/B
NEXT
OPEN • CLOSE
12
➜ The display freezes and the elapsed playing
time flashes when playback is interrupted.
To stop disc playback, press STOP 9.
6
Note: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE, TUNER or AUX.

Selecting a different track

¶ Press PREV ¡1 or NEXT 2™ on the system,
(on the remote control ¡ or ™) once or
repeatedly until the desired track number
appears in the display.
¶ If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press PLAY•PAUSE 2; (on the
remote control 2) to start playback.

Finding a passage within a track

Press and hold down on PREV ¡1 or NEXT
1
2™.
➜ The disc is played at high speed and low
volume.
2
When you recognise the passage you want,
release PREV ¡1 or NEXT 2™.
➜ Normal playback continues.
Note:
– During a disc programme or if SHUFFLE/
REPEAT active, searching is only possible within the
same track.
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The play
modes can also be combined with
PROGRAMME.
SHUFFLE ......... tracks of the entire disc/
programme are played in
random order
SHUFFLE and REPEAT ALL...to repeat the
entire disc/ programme
continuously in random order
REPEAT ALL ... repeats the entire disc/
programme
REPEAT ............ plays the current track
continuously
12/7/00, 1:31 PM
3140 115 27782