Basic Functions; Switching The System On; Switch The System To Eco Power Standby Mode; Power Saving Automatic Standby - Philips MCM240/25 User Manual

Important!
Before you operate the system, complete
the preparation procedures.

Switching the system on

●
Press STANDBY-ON/ECO POWER (or B
on the remote).
➜
The system will switch to the last selected
source.
●
Press CD, TUNER or AUX on the remote
control.
➜
The system will switch to the selected source.
●
Press OPEN•CLOSEç.
➜
The system will switch to the CD source.
Switching the system to Eco
Power Standby mode
●
Press STANDBY-ON/ECO POWER (or B
on the remote).
➜
The backlight for clock display is dim in
standby.
➜ "ECO PWR" will be displayed, then the display
screen will go blank.
➜
The ECO POWER LED will be lighted.

Basic Functions

●
To view clock time in standby mode, press and
hold STANDBY-ON/ECO POWER (or B
on the remote) for more than 3 seconds or
more.
➜
The system enters the standby mode with
clock display.
●
The volume level (up to a maximum volume
level of 20), interactive sound settings, last
selected mode (ECO Power Standby or normal
standby), source and tuner presets will be
retained in the player's memory.

Power Saving Automatic Standby

As a power-saving feature, the system
automatically switches to Eco Power/ Standby 15
minutes after a CD has reached the end and no
control is operated.

Adjusting volume and sound

1
Press VOLUME 3 / 4 (+/-) to decrease or
increase the volume.
➜
Display shows the volume level VOL and a
number from MIN1, 2, ...30, 31 MAX.
2
Press DSC repeatedly to select the desired
sound effect: ROCK/ JAZZ/ POP/ CLASSIC.
3
Press DBB to switch bass enhancement on or
off.
➜ Display shows: DBB.
4
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜
Playback will continue without sound and the
display shows MUTE.
●
To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
11