Reviewing The Programme; Erasing The Program - Philips MCM240/25 User Manual

CD/MP3-CD Operation
3
Press PROGRAM to confirm the track number
to be stored.
➜ PROG X is shown briefly, followed by the
number of the track (for MP3-CD, the album
and title numbers of the track) you just stored.
X denotes the next program number to be
stored
4
Repeat steps 2-3 to select and store all desired
tracks.
➜ FULL is displayed if you attempt to program
more than 40 tracks.
5
To star t playback of your disc program, press
STOP 9 followed by ÉÅ or press ÉÅ
directly.
Reviewing the program
In STOP mode, press and hold PROGRAM
until the display shows all your stored track
number in sequence.

Erasing the program

You can erase the program by:
● pressing STOP 9 once in the STOP mode;
● pressing STOP 9 twice during playback;
●
opening the CD compartment;
➜ PROGRAM disappears, CLEAR scrolls and
then disappears from the display.
14