Clock/Timer; Setting The Clock; Setting The Timer; Activating And Deactivating Timer - Philips MC145/05 User Manual

Setting the clock

1
In Standby mode, press DISPLAY/CLOCK
button.
➜ The clock digits for the hours flash.
Press ¡1 / 2™ to set the hours.
2
3
Press DISPLAY/CLOCK again.
➜ The clock digits for the minutes flash.
Press ¡1 / 2™ to set the minutes.
4
5
Press DISPLAY/CLOCK to confirm the time.
Note:
– If the clock has not been set, --:-- will be
displayed.

Setting the timer

● The system can be used as an alarm clock. CD
or TUNER can be set to switch on at a preset
time. The clock time needs to be set first before
the timer can be used.
● If no button is pressed within 90 seconds during
timer setup, the system will exit timer setting
mode automatically.
1
In any mode, press TIMER for more than 2
seconds.
Press ¡1 / 2™ (CD / TUNER or ¡1 / 2™
2
on the remote control) to select sound source.
3
Press TIMER to confirm your desired source.
➜ The clock digits for the hours flash.
Press ¡1 / 2™ to set the hours.
4
5
Press TIMER again.
➜ The clock digits for the minutes flash.
Press ¡1 / 2™ to set the minutes.
6
7
Press TIMER to confirm the time.
➜ The timer is now set and actiated.
Note:
- If source CD is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
Activating and deactivating
TIMER
● In standby or during playback, press
TIMER once.
➜ Display shows
TIMER
disappears if deactivated.

Clock/Timer

if activated, and
15