Disposal Of Appliance And Packaging; Technical Data - Atag HG62 B Series Manual

APPENDIX

Disposal of appliance and packaging

Technical data

The packaging of this appliance is recyclable and may have been
made of:
• cardboard
• paper
• polythene foil (PE)
• CFC-free polystyrene (PS hard foam)
• polypropylene tape (PP).
Dispose of these materials in a responsible manner and in accordance
with government regulations.
The appliance carries the symbol of a crossed-out dustbin to state that
segregated processing is compulsory to avoid any negative effects on
the environment and public health. This means that at the end of its
working life, you must hand it in at a special refuse collection centre run
by your local authority or dealer.
Segregated processing enables the recovery of the materials used in
the production of this appliance, thus saving considerably in terms of
raw materials and energy.
Declaration of conformity
We declare that our products meet the applicable European Directives,
Decisions and Regulations and the requirements listed in the standards
referenced.
On the label on the bottom of this equipment, you will find the total
wattage, the required voltage and the frequency.
EN 33