Building In - Atag HG62 B Series Manual

INSTALLATION INSTRUCTIONS

Building in

Only for France:
EN 24
Preparing the hob
1. Fit the elbow supplied on the appliance's gas connection.
1/2" ISO 228 (straight)
1/2" ISO 10226-1 (conical)
Sealing ring
1/2" ISO 228 (straight)
1/2" ISO 228 (straight)
Sealing ring
Cut opening in worktop
1. Cut the opening in the worktop very accurately (see building in
dimensions).
2. If the worktop is made of treated wood, coat the sawn surfaces of
the top with sealing varnish, to prevent moisture causing the top to
swell.