Controls - Atag HG62 B Series Manual

CONTROLS

Igniting and adjusting
HG....B
HG....C
Each burner can be adjusted continuously between the high and low
positions.
1
1. 0-setting
2. Burner indication
3. Low setting
4. High setting
3
4
2
1
3
4
2
Flame failure device
Your gas hob has a flame failure device. This ensures that the gas
supply is shut off if the flame goes out during cooking.
Operating the thermal flame failure device
(HG....B)
1. Press the control knob and turn it anti-clockwise. Hold the control
knob pressed in high setting for approximately 3 seconds after the
burner has ignited.
The flame failure device switches on.
EN 9