Toro Reelmaster 5610 Owner's/Operator's Manual page 11

Figure 6
1. Opposite carrier-frame tab
D. Mount the rod bracket to the cutting-unit
tabs with the carriage bolts and nuts
6).
Important:
and cutting unit 5 (right front) , use the
rod-bracket mounting nuts to install
the hose guides to the front of the
cutting-unit tabs
The hose guides should lean toward the
center cutting unit
9).
Figure 7
1. Cutting unit 1
2. Cutting unit 2
3. Cutting unit 3
4. Cutting unit 4
1. Hose guides must lean toward the center cutting unit.
2. Rod bracket
On cutting unit 4 (left front)
(Figure 7 and Figure
(Figure 8 and
5. Cutting unit 5
6. Reel motor
7. Weight
g003967
(Figure
8).
Figure
1. Hose guide (cutting unit 4
shown)
2. Rod bracket
g030896
Figure 9
11
Figure 8
3. Nut
g015160
g019284