Advertisement
Setting the clock
1
In standby mode, press and hold
2
When the hour digits flash, press
3
Press
again and the minute digits flash. Then press
CLOCK
remote) to set the minutes.
4
Press
again to confirm the time setting.
CLOCK
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support progressive
signals or the cables are not connected accordingly, see the user manual for proper progressive
scan setup or deactivate the progressive scan feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM MENU on the remote to exit the system menu and then DISC to exit
progressive scan.
CLOSED CAPTIONS
DIVX(R) VOD
DIVX(R) VOD
on the remote.
CLOCK
VOLUME-/+ (VOL+/-
on the remote) to set the hours.
Tip
See chapters "Preparations" and "System
Menu Options" in the User Manual for
detailed descriptions.
VOLUME-/+ (VOL+/-
on the
Advertisement
