Cd/Mp3-Cd Operation; Loading A Disc; Basic Playback Controls - Philips MCM700/12 User Manual

Important!
The lens of the CD player should never be
touched.

Loading a disc

This CD player plays Audio Discs including CD
Recordables, CD-Rewritables and MP3 CD.
●
CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1
Press SOURCE on the top of the system to
select CD or press CD on the remote.
2
Press 0 to open the CD compartment.
➜ OPEN is displayed when the compartment
cover slides up.

CD/MP3-CD Operation

3
Insert a disc with the printed side facing up. Press
0 again to close the compartment.
➜ CLOSE is displayed followed by READ DISC
as the CD player scans the contents of a disc,
and then playback starts automatically (if not,
press ÉÅ).

Basic playback controls

To play a disc
●
Press ÉÅ to start playback.
➜
The current track number and elapsed
playing time of the track are displayed during
disc playback.
To select a different track
●
Press the control knob on the front panel to the
left or right (corresponding to
press ¡ / ™ on the remote once or repeatedly
until the desired track number appears in the
display.
●
You can also use the Numerical Keypad
(0~9) on the remote to select a track directly.
●
To input a number larger than 10, press SHIFT
on the remote once or more to select the first
digit you want and then use the Numerical
Keypad (0~9) to input the second digit.
●
If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press ÉÅ to start playback.
Text display during playback
In CD mode
●
Press DISPLAY on the remote control
repeatedly to see the following information.
➜
Track number and elapsed playback time of
current track.
➜
Track number and remaining playback time of
current track.
➜
Track number and total remaining playback
time.
In MP3-CD mode
●
Press DISPLAY on the remote control to
display the ID-3 information if available.
/ ) or
S T
15