Summit 82069 Manual page 3

4
ASSEMBLY
SEAT UPRIGHT
1. Position two Standoff Tabs on the inside of the Seat
Upright Bar as shown in figure 1. Use two of the
Washers on the outside of the Seat Upright tubing.
2. Slide the Seat Pan up and line up the holes. The
expanded metal side of the Seat Pan should face up as
shown in figure 2. Use two,
to secure the Seat Pan, Washers, Upright and Standoff
Tabs as shown.
3. Position the platform below the completed Seat
Upright Assembly. The expanded metal side of the
Platform should face up. Use two
between the Upright Bar and the two welded tabs on
the platform as shown in figure 3.
4. Slide the Seat Upright down between the tabs and
secure using two 2" bolts and lock nuts
figure 4.)
3
1/4" WASHER
(82069, 82070, 82071 only)
1/4"
2 3/4" bolts and lock nuts
1/4" washers
(as shown in
SEAT UPRIGHT
ASSEMBLY
1/4"
WASHER
PLATFORM
(82070 shown, others similar)
1
SEAT
UPRIGHT
BAR
1/4" WASHER
2 3/4" BOLTS, LOCK NUTS -
WRENCH TIGHTEN
2
4
STANDOFF TABS
2" BOLTS, LOCK NUTS -
WRENCH TIGHTEN
SEAT PAN
PG 3