Advertisement
Setting the clock
1
In standby mode, press and hold
2
When the hour digits flash, turn
remote to set the hours.
3
Press
again and the minute digits flash. Then turn
CLOCK
press
on the remote to set the minutes.
VOL +/-
4
Press
again to confirm the time setting.
CLOCK
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does
not support progressive signals or the cables are not connected
accordingly, see the user manual for proper progressive scan setup or
deactivate the progressive scan feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM MENU on the remote to exit the system menu and
then DISC and "1" to exit progressive scan.
DIVX [ R ] VOD
Tip
See chapters "Getting Started" and "System Menu Options" in the User Manual for detailed descriptions.
Playing a disc
1
ç
Press
to open the disc tray and load in a disc, then press the same button again to close the disc tray.
➜ Make sure the label side of the disc is facing up.
2
Playback will start automatically. If not pressÉÅ.
3
To stop playback, press 9.
on the remote.
CLOCK
on the system or press
VOLUME-/+
VOLUME-/+
on the
VOL +/-
on the system or
Advertisement
