Clock/Timer; Setting The Clock; Setting The Timer; Activating And Deactivating Timer - Philips MCM108DB/37B Owner's Manual

Docking entertainment system
Hide thumbs Also See for MCM108DB/37B:
Table of Contents

Advertisement

Clock/Timer

M I C R O S Y S T E M
iR

Setting the clock

1
In Standby mode, press PROG/CLOCK
button.
The clock digits for the hours flash.
2
Press ¡1 / 2™ to set the hours.
3
Press PROG/CLOCK again.
The clock digits for the minutes flash.
4
Press ¡1 / 2™ to set the minutes.
5
Press PROG/CLOCK to confirm the time.
Note:
– If the clock has not been set, -- --:-- -- will be
displayed.

Setting the timer

The system can be used as an alarm clock. CD
or TUNER or DOCK can be set to switch on at
a preset time. The clock time needs to be set
first before the timer can be used.
If no button is pressed within 90 seconds during
timer setup, the system will exit timer setting
mode automatically.
1
In standby or during playback, press TIMER on
the remote control for more than 2 seconds.
2
Press ¡1 / 2™ (or CD/TUNER/DOCK on
the remote control) to select sound source.
3
Press TIMER to confirm your desired source.
The clock digits for the hours flash.
18
M C M 1 0 8 D B
4
Press ¡1 / 2™ to set the hours.
5
Press TIMER again.
The clock digits for the minutes flash.
6
Press ¡1 / 2™ to set the minutes.
7
Press TIMER to confirm the time.
The timer is now set and actiated.
Notes:
- If source CD is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
- If source DOCK is selected and no iPod is docked
or no dock connection is made, TUNER will be
selected automatically.
To activate and deactivate timer
In standby or during playback, press
TIMER once.
Display shows
if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
Press SLEEP on the remote control repeatly to
select desired time before
system shuts off.
Display shows SLEEP and
series of time options for
selection:
,
,
To deactivate, press SLEEP on the remote
control once or more until "
press STANDBY ON on the system or
remote control.
if activated, and disappears
SLEEP
TIMER
,
,
,
...
" is shown, or

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcm108db/37Mcm108dbMcm108db/37x

Table of Contents