Listening To Fm Radio - Emerson ER-X300 Owner's Manual

Bluetooth speaker with wireless charger, phone rest that extends and rotates, usb charger, fm radio, alarm clock and 10 watt stereo

Hide thumbs

Table Of Contents

Table of Contents

• Enable your Bluetooth device and select ER-X300 from its Available / Paired device list. If pairing

successful, the unit will have quick 4-beat sound prompt out and

then light up and become solid.

• Automatic connection with your Bluetooth devices is possible if they have been paired

successfully with this unit before.

• After paired, you can play your music through this Bass Boosted Bluetooth Speaker.

• Press the Tune Down

volume level can also be adjusted on the paired audio device.

• Press and hold the Tune Down

forward to next song.

• Press the

button for a play pause. To resume playback, press this button once again.

• When done listening, press the

press and hold the

Note: If pairing unsuccessful, all previously paired Bluetooth devices around should be disconnected

or turned off first, in order to avoid making any auto reconnection between them. Then, set this unit

to Bluetooth mode, and tap the Bluetooth switch on your phone / device off and back on again to

refresh/ search any nearby "ER-X300" for pairing.

ress and hold the Power

button twice to switch it to Radio mode. Radio frequency will display with its MHz unit and

decimal point (one decimal place) discarded

1. Ensure the USB cable is connected to the unit as it functions as the FM antenna for optimal

FM signal reception (USB adapter is not required but only the cable).

2. Auto Memory Saving (AMS) - Auto Searching / Scanning / Saving FM Stations

hold the

button for 1~2 seconds and then release for automatic searching and saving

the captured radio stations into memory (program number from P01 to P50).

Note: Searching will only stop at a station with acceptable reception before saving into memory.

Manual tuning not available

3. Recalling Favorite Stations from Memory

•

Press and hold the Tune Down

number on screen, and select the stored program number to recall your favorite station

stored. Radio frequency (MHz) will be showing after the program number, having its decimal

or Tune Up

button to play last song or Tune Up

button to change to either Radio mode or AUX mode. Or

button to turn the unit Off.