Care And Maintenance; Troubleshooting - Emerson ER-X300 Owner's Manual

Care Of Cabinets
If the cabinet becomes dusty, wipe it with a soft cloth.
•
If the cabinet becomes smudged or dirty, clean it with a soft, slightly dampened cloth.
•
Never allow water or any liquid to get inside the cabinet.
•
Never use any abrasive cleaners or cleaning pads as these will damage the finish of your product.
•
UNIT DOESN'T RESPOND (NO POWER)
•
Make sure unit is completely charged. Check that all connections are correct and properly
plugged in. Make sure your device is properly paired with the ER-X300.
RESETTING THE UNIT
•
If the unit does not respond properly or appears to be "frozen", unfold a paperclip and insert the
end of the object into the AUX hole where the reset button resides.
LOW BATTERY
•
2-beat sound will be heard while the battery level is low to alert user to recharge the unit with the
power adaptor and USB charging cable provided.
PHONE REST ARM LOOSING
•
If you find that after you have placed your device on the arm mount and it is "too loose", the
support screws may be adjusted / tightened manually with a screwdriver.
** Do not over tighten the screws**

Care and Maintenance

Troubleshooting