Setting The Alarm - Emerson ER-X300 Owner's Manual

Setting the Alarm

1. Press and hold the
2. Press the button to have the display "Flashes" Minutes (Clock Minutes).
3. Press the button again to enter into "Alarm Time Set" mode to have the display "Flashes"
Alarm Hour.
4. Press the Tune Down
Hour.
5. Press the button again to have the display "Flashes" Alarm Minutes.
6. Press the Tune Down
Minutes.
7. Press and hold the
Turn On/ Off Alarm Function
Press and hold the
button four times. Then press the adjustment button
the Alarm function.
Press and hold the Power
button once to enter into Bluetooth mode. A 2-beat sound is heard and "bLUE" is displayed,
also, a Blue LED indicator on control panel as well as the Bluetooth
flashes for pairing.
Setting the Alarm
NING
button to have the display "Flashes" Hour (Clock Hour).
or Tune Up button to move backward or forward to set Alarm
or Tune Up button to move backward or forward to set Alarm
button after completed setting the alarm.
button until the display "Flashes" Hour, continuously press the
Pairing Bluetooth
Speaker
button to turn the unit ON, and then press the Power
at center of panel to turn "ON" or "OFF"
Icon on front screen