Charging The Unit; Setting The Time Manually - Emerson ER-X300 Owner's Manual

1. Connect the USB cable with one end (micro USB) plugged into the micro USB connector at the
back of the unit, and the other end (standard USB) plugged into the output port of the DC5V/2.4A
USB Adaptor provided.
2. For first time use, approximately 4 hours is required for a full charge.
3. A red indicator below the micro USB connector lights up while charging the unit and it changes to
blue after fully charged.
Note: Battery will last up to 4 hours when connected wirelessly and up to 12 hours when connected
through Line-In Audio Jack with audio output volume set at medium level.
Display Indication
Press and hold the Power
1. Press and hold the
2. Press the Tune Down
3. Press the button once, the display "Flashes" Minutes.
4. Press the Tune Down
5. Press and hold the
6. While in clock mode, select 12/24-hour format by pressing and holding the
12-hour format).
12-hour format (AM)

Charging the Unit

Setting the Time Manually

button until a harmonic sound chimes to denote the unit ON.
button until the display "Flashes" Hour.
or Tune Up
or Tune Up
button to end and stop "Flashing" after time set.
12-hour format (PM)
button to move backward or forward the Hour.
button to move backward or forward the Minutes.
24-hour format
button (default is