Preparation For Use - Emerson ER-X300 Owner's Manual

Bluetooth speaker with wireless charger, phone rest that extends and rotates, usb charger, fm radio, alarm clock and 10 watt stereo

Hide thumbs

Table Of Contents

Table of Contents

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Note: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

The device has been evaluated to meet gene ral RF exposure requirement.

To maintain compliance with FCC's RF exposure guidelines, the distance must be at

least 20 cm between the radiator and your body, and fully supported by the operating

and installation configurations of the trans and its antenna(s).

Thank you for purchasing this Emerson Strong Bass Portable Bluetooth Speaker ER-

X300. If you encounter any problems with the set up or operation of this item, please call the

Emerson Consumer Products Corp., Customer Service Hotline, toll free, at

Unpacking and Setup

•

Remove the unit from the box and remove all packing material from the unit. Save the packing

material, if possible, in case the unit ever needs to be serviced or transported. The original

box and packing material is the only safe way to pack your unit to protect it from damage in

transit.

•

Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any

labels or stickers from the back or bottom of the cabinet.

•

The serial number on the bottom of your unit and write this number in the space provided on the

Warranty page of this manual.

•

Place your unit on a level surface such as a table, desk or shelf, out of direct sunlight, and away

from sources of excess heat, dirt, dust, moisture, humidity, or vibration.

Protect Your Furniture

This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you

operation the controls. These 'feet' are made from non-migrating rubber material specially formulated

to avoid leaving any marks or stains on your furniture.

polishes, wood preservatives, or cleaning sprays may causes the rubber 'feet' to soften, and leave

marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly

recommend that you purchase small self-adhesive felt pads, available at hardware stores and home

improvement centers everywhere, and apply these pads to the bottom of the rubber 'feet' before you

place the product on fine wooden furniture.

Power Source

This product is designed to be powered by a built-in rechargeable lithium-ion battery and a

DC5V/2.4A USB Adapter via a USB cable provided.