Engine (Ignition) Switch (Vehicles Without A Smart Entry & Start System) - Toyota Corolla Manual

2-1. Driving procedures
Engine (ignition) switch (vehicles without a smart entry & start system)
 Starting the engine
Automatic transmission
Check that the parking brake is set.
STEP 1
Check that the shift lever is set in P.
STEP 2
Sit in the driver's seat and firmly depress the brake pedal.
STEP 3
Turn the engine switch to the "START" position and start
STEP 4
the engine.
Multi-mode manual transmission
Check that the parking brake is set.
STEP 1
Firmly depress the brake pedal, turn the engine switch to
STEP 2
the "ON" position and shift the shift lever to N.
Turn the engine switch to the "START" position and start
STEP 3
the engine.
Diesel engine only:
after
Manual transmission
Check that the parking brake is set.
STEP 1
Check that the shift lever is set in N.
STEP 2
Firmly depress the clutch pedal.
STEP 3
Turn the engine switch to the "START" position and start
STEP 4
the engine.
Diesel engine only:
after
136
TMC corolla_EE
turns on. The engine begins starting
goes out.
turns on. The engine begins starting
goes out.