Safety Pictograms In Accordance With Din 4844 - Beko DRYPOINT RS HP50 NA Series Instructions For Installation And Operation Manual

Safety instructions
2.1

Safety pictograms in accordance with DIN 4844

Observe operating instructions
General danger symbol
Supply voltage
Danger: component or system under pressure
Hot surfaces
Non-breathable air
Do not use water to extinguish the fire
Do not operate with open cover (housing)
Maintenance works or controlling measures must only be carried out by qualified personnel
Do not smoke
Note
Pos : 4 /Beko Tec hnisc he Dokumentati on/Sic herheit/Gefahr Druc kluft @ 0\mod_1184148143854_6.doc @ 577
6
ARIA
AIR
Connection point compressed-air inlet
LUFT
AIR
ARIA
AIR
Connection point compressed-air outlet
LUFT
AIR
Connection point condensate drain
Connection point cooling-water inlet (water-cooled)
Connection point cooling-water outlet (water-cooled)
1
Certified skilled personnel are persons who are authorised by the manufacturer, with experience and technical training, who are well-
grounded in the respective provisions and laws and capable of carrying out the required works and of identifying and avoiding any
risks during
Qualified and authorised operators are persons who are instructed by the manufacturer regarding the handling of the refrigeration
system, with experience and technical training, and who are well-grounded in the respective provisions and laws.
6
the machine transport, installation, operation
DRYPOINT® RS 15-550 HP50 NA
1
and maintenance.