Advertisement
Mobile Rechargeable SMD LED Light
D
•
Unplug the light from the power supply and switch it off before
cleaning.
•
Do not look directly at the light to avoid being blinded.
INTENDED USE
This LED light is intended for general use as an indoor or outdoor light,
for instance at home, on the campground, in the garage, etc.
SETTING UP AND TURNING ON THE LIGHT
Place the light on a dry, level surface. The tilt angle of the light can be
adjusted. To do so, slightly loosen the screws on the side and move
the lamp head into the desired position. Tighten the screws again.
SwITcHING THE LIGHT ON/OFF (I):
To turn the light on, press button (A) on the side.
Model ML DA 1206 DE 3993:
Pressing button (A) again switches the light off.
Model ML DA 2407 DE 3993: The light will shine at 50% brightness.
To switch to 100% brightness, press button (A) again.
Pressing button (A) again switches the light off.
BATTERy LEVEL INDIcATOR:
Displays the current charging status of the battery, or, how much
energy is still available. The battery level indicator (B) appears
automatically when the light is switched on. During charging,
the battery level indicator (B) displays the current battery level.
If all 4 LEDs are lit, the battery is fully charged. If the battery is nearly
empty the LED light flashes 5 times, and the battery level indicator
(B) flashes continuously. The light will then remain on for approx.
10 minutes at 50% brightness, until the deep discharge protection
switches the light off. This provides sufficient time to replace the
battery or stop working.
12
A-16P027_ML_DA_1206_DE_3993-ML_DA_2407_DE_3993_0489629_DinA6_170420.indd 12
20.04.17 11:06
Advertisement
