Table of Contents
Advertisement
Available languages
Available languages
Operating Instructions
D
SMD LED Light
ML DN 2806 S IP54 / ML DN 4006 S IP54 / L DN 2806 S IP54
Please note: Please read these instructions carefully prior to mounting the light and store them
in a safe location afterwards!
TEcHNIcaL DaTa:
Type of protection:
Protection class:
Nominal voltage:
Operating temperature: -20°C – +40°C
article:
ML DN 2806 S IP54
ML DN 4006 S IP54
L DN 2806 S IP54
PrOPEr INTENDED uSE:
This high-performance LED lamp is for lighting interior and exterior areas (e.g. workshops,
camping, garage, household, etc.). The LED lamp is delivered, ready to connect, with a connection
line and ground contact plug. All models are spray water-resistant.
Any other use than those described above or modifications to the device are not permitted.
OPEraTION:
ML DN 2806 S IP54 / ML DN 4006 S IP54
Place on a dry, flat surface. The lamp can be switched on and off using the switch on the rear side.
L DN 2806 S IP54
The lamp can be installed on a suitable tripod. Make sure the tripod is sufficiently stable and the
lamp is securely installed.
Installation height: <3 m.
BA_SMD_LED-Leuchte_ 0487226_240707.indd 5
IP 54
I
220 – 240 V~ 50/60 Hz
Output:
connection cable:
20 W
2 m H05RN-F 3G1.0
30 W
2 m H05RN-F 3G1.0
20 W
3 m H05RN-F 3G1.0
Dimensions (mm)
weight:
194 x 210 x 326.5
1800 g
194 x 210 x 326.5
1800 g
194 x 80 x 194
1150 g
5
24.07.15 13:46
Advertisement
Table of Contents
