Preparations; Rear Connections - Philips Dcm230 Docking Entertainment System User Manual

Rear connections

The type plate is located at the rear of the
system.
For users in the U.K.: please follow the
instructions on page 2.
A
Power
●
Before connecting the AC power adaptor to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original AC power adaptor.
– Never make or change connections with
the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
FM wire antenna
B
●

Preparations

AC power adaptor
Antennas Connection
Connect the supplied MW loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
MW Antenna
Position the antenna as far as possible from a TV,
VCR or other radiation source.
MW loop
antenna
9