Clock/Timer; Clock Setting; Timer Setting; Activating And Deactivating Timer - Philips Dcm230 Docking Entertainment System User Manual

Clock/Timer

Clock setting

The clock can be set in either 12-hour or
24-hour mode (12HR or 24HR for example).
1
In standby mode, press PROG.
➜ SET CLOCK is displayed briefly. Then, 12HR
or 24HR is displayed.
2
Press ALBUM/PRESET +/- (or ¡ / ™ on the
remote control) to select clock mode.
➜
The clock digits for the hours continue to
flash.
3
Press ALBUM/PRESET +/- (or ¡ / ™ on the
remote control) to set the hours.
4
Press PROG again.
➜
The clock digits for the minutes flash.
5
Press ALBUM/PRESET +/- (or ¡ / ™ on the
remote control) to set the minutes.
6
Press PROG to confirm the time.
22

Timer setting

●
The system can be used as an alarm clock,
iPod
whereby the CD, TUNER, USB or DOCK is
switched on at a set time (one time operation).
The clock time needs to be set first before the
timer can be used.
●
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
Press TIMER for more than two seconds.
2
Press SOURCE repeatedly to select the sound
source.
➜
displayed.
3
Press TIMER to confirm your desired mode.
➜
4
Press ALBUM/PRESET +/- (or ¡ / ™ on the
remote control) to set the hours.
5
Press TIMER again.
➜
6
Press ALBUM/PRESET +/- (or ¡ / ™ on the
remote control) to set the minutes.
7
Press TIMER to confirm the time.
TIMER
➜

Activating and deactivating timer

●
In standby or during playback, press TIMER
once on the remote control.
➜
deactivated.
"SET TIMER" and "SELECT SOURCE" are
The clock digits for the hours flash.
The clock digits for the minutes flash.
The timer is now set and activated.
Display shows if activated, and disappears if