Gallagher PowerPlus B40 Instructions Manual page 6

Connect the Energizer to fence and earth
1. Place the Energizer on the ground close to the fence but out range of any
stock.
2. Connect the fence leads (green and red) to the Energizer terminals.
Refer to the Terminals section for further details.
3. Insert earth stake into the ground.
4. Connect the green lead to the earth stake.
5. Connect the red lead to the fence.
Switch the Energizer on
Using the rotary dial, switch the Energizer on to the desired operating mode and
confirm the indicator LED is flashing with each pulse.
6