Using Phones B 3&4 Switch To Cue Up Tracks In Ableton Lite Live - Ssl 2+ User Manual

Using Phones B 3&4 Switch To Cue Up Tracks In Ableton Live Lite
The ability to switch PHONES B to pickup USB Stream 3-4 directly
from the front panel is really helpful for Ableton Live Lite users
who like to cue up tracks when performing a live set, without the
audience hearing it.
Follow these steps:
1. Ensure that Outputs 3-4 are enabled in Ableton Live Lite's
'Preferences' > 'Output Config' - Outputs 3-4 boxes should be
orange.
2. On the Master Track, set 'Cue Out' to '3/4'.
3. On the Master Track, click the 'Solo' box so that it turns into a
'Cue' box.
4. To cue up a track press the blue Headphones symbol on the
desired track and then launch a clip on that track. To make sure
that the audience does not hear you cue'ing track in the main
master output 1-2, mute the track first, or, pull the fader all the
way down.
5. Use the 3&4 switch to switch PHONES B between what you are
cueing up and what the audience are hearing.
Step 5 - Switch between Cue and Main Mix
Step 4 - Click this button to cue track
SSL 2+ User Guide
Step 1 - Ensure Outputs 3&4 are enabled
Step 2 - 'Cue Out' set to 3/4
Step 3 - Click this button
so that it changes from 'Solo' to 'Cue'
How-To / Application Examples
23