Step 4: Connect Monitor; Step 5: Connect Power; Step 6: Upgrade Firmware To Latest Version (If Available) - Lorex N841 Series User Manual

4 Basic System Setup

4.4 STEP 4: Connect monitor

Connect the recorder to a monitor using the included HDMI cable (supports up to 4K resolution).
OR
Connect the recorder to a monitor using a VGA cable (not included - supports up to 1080p
resolution).
CAUTION
If you need to switch monitors, make sure you set the recorder to an output resolution supported by the new moni-
tor before switching. See 16.4.16 Setting the Monitor Resolution (Display), page 89 for details.

4.5 STEP 5: Connect power

Use the included power adapter to connect the recorder to a nearby outlet.

4.6 STEP 6: Upgrade Firmware to Latest Version (If Available)

If a firmware upgrade is available, you will be asked to install it once the system starts up. It is rec-
ommended to upgrade your system firmware and client software or mobile apps to the latest ver-
sion to ensure remote connectivity to the system and support newly-developed features.
#LX400113; r. 1.0/56015/56022; en-US 8