Table of Contents
Advertisement
network vlan planning to configure. The default priority is 0.
【Type】Select "Route".
【Service List】Select internet. route mode access internet are generally select
internet.
【MTU】The default is 1492 does not need to modify; if you meet can ping DNS but
the web browser can not access the site. Modify MTU smaller, such
as: 1400.
【Link Type】Select "IP".
【IP Version】The default is "Ipv4". ONU itself does not support IPV6.
【IP Type】Select "static".
【Enable NAT】Check the "Enable NAT" function; NAT function is mainly used for
internal network and external network communication address
translation function, the default is checked enabled state, if not
check the network ONU not get the network.
【Ip Address】 Static ip address access Internet.
【Subnet Mask】Subnet Mask of Static ip address.
【Gateway】The default gateway for static ip address Internet access.
【DNS Server1 IP Address/DNS Server2 IP Address/DNS Server3 IP Address】The
first DNS, the second DNS and the third DNS for for static ip
address Internet access.
Note:
ZTE solution ONU series of products is no port binding function, because
the ONU is SFU (pure data)+ Routing, the ONU either works in SFU mode, or is
working in routing mode.
Advertisement
Table of Contents
