Internet Basic Configuration - Zte EPON SFU Series User Manual

1ge/1ge+catv

Table of Contents

to configure the LOID. The LOID of the ONU is configured as follows:

1.web login ONU select the Network -> PON -> LOID, you can set and view the

ONU LOID and password:

2.After completing the LOID and password settings, you can click the "Submit"

button below to complete the setup.

5 Internet Basic Configuration

ZTE ONU series of products support route function, Internet can work by route

mode or bridge mode, the difference between the two modes are as follows:

Routing mode Broadband Internet access: ONU as a home gateway

equipment, ONU on route mode can obtained IP address in three ways: DHCP,

static IP and PPPoE. The IP address of the user terminal device (PC, etc.) obtained

by the ONU own DHCP address pool or manually set the static IP address the

same as DHCP address pool.

Bridging mode broadband Internet access: ONU itself will not get the IP

address assigned by the upper device, or can not manually set the static IP address,

then ONU as a relay device. The IP address of the user device (PC) connecting the

Table of Contents