Table of Contents
Advertisement
Busy Lamp Field/Console Graphics Module
Installation
The Busy Lamp Field/Console Graphics Module (BLF/CGM) can be added
to an M1250 or M2250 attendant console.
The BLF/CGM can do the following:
•
display the status (busy or idle) of up to 150 consecutive extensions
within the Meridian 1 Standard Busy Lamp Field (SBLF)
•
display the status (busy or idle) of any hundreds group of DNs within the
system Enhanced Busy Lamp Field (EBLF)
•
display which attendant console is the supervisory console and which
consoles are active
•
display supplementary information about individual extensions, such as
the reason the person is away (business, vacation, or illness), when the
person is due to return, and an alternate extension where calls to the
person should be directed
•
display a company logo
•
display graphics
•
display text in any one of eight languages
•
have its screen contrast adjusted for easy viewing
The BLF/CGM mounts on the back of the attendant console and is held on by
snapfits and screws. It is connected to the console using a 16-way connector
that is located on the keyboard Printed Circuit Board (PCB). This connector
is accessed through a rectangular knockout section located underneath the
casing overhang at the Meridian logo location. See Figure 3 on page 21.
For more on installing the BLF/CGM, refer to Telephone and Attendant
Console: Installation (553-3001-215). For more on the features and operation
of the BLF/CGM, refer to the Busy Lamp Field/Console Graphics Module
user guide.
Description
Page 27 of 64
Attendant Consoles Description
Hide quick links:
Advertisement
Table of Contents
