Power On Status]; T R 72 [Wake On Lan] F W; Ism Method] J P; Booting Logo Image] S N, A3 - LG L18 User Manual

58
* To read or delete a Holiday Schedule you have set, [Data2][Data3]
[Data4] must be set to FF.
* To read all Holiday Schedules you have set, [Data1][Data2][Data3]
[Data4] must be set to FF.
Example 1: sn 01 1b f1 ff ff ff - Reads the 1st index data in
Holiday Schedule.
Example 2: sn 01 1b ff ff ff ff - Reads all index data in Holiday
Schedule.
Example 3: sn 01 1b e1 ff ff ff - Deletes the 1st index data in
Holiday Schedule.
Example 4: sn 01 1b 01 07 0c 18 - Sets and adds the holiday
schedule from January 7 to December 24.
* Schedules that have been set in advance are not added.
* This feature does not work if the current time is not set.
* This feature may not be available for all models.
Acknowledgment
(s)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(x)
71. [Power On Status] (Command: t r)
Sets the Power On status of the monitor.
Transmission
(t)(r)( )(Set ID)( )(Data)(Cr)
Data 00: LST (Maintains the previous power status)
01: STD (Keeps the power off)
02: PWR (Keeps the power on)
Acknowledgment
(r)( )(Set ID)( )(OK/NG)(Data)(x)
72. [Wake On LAN] (Command: f w)
Selects a Wake On LAN option.
Transmission
(f)(w)( )(Set ID)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgment
(w)( )(Set ID)( )(OK/NG)(Data)(x)
73. [ISM Method] (Command: j p)
Sets the ISM Method function.
Transmission
(j)(p)( )(Set ID)( )(Data)(Cr)
Data 01: [Inversion]
02: [Orbiter]
04: [Remove (white pattern)]
08: [Standard]
20: [Remove (colored pattern)]
80: [Washing Bar]
90: [User Image]
* If Timer is set to Immediately, the jp command operates.
Acknowledgment
(p)( )(Set ID)( )(OK/NG)(Data)(x)
74. [Booting Logo Image] (Command: s n, a3)
Sets the Booting Logo Image mode.
Transmission
(s)(n)( )(Set ID)( )(a)(3)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(a)(3)(Data)(x)
* This feature may not be available for all models.
75. [No Signal Image] (Command: s n, a9)
Turns on/off No Signal Image.
Transmission
(s)(n)( )(Set ID)( )(a)(9)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(a)(9)(Data)(x)
* This feature may not be available for all models.