[Advanced Setting] - LG L18 User Manual

[Advanced Setting]

[Display]
[Energy Saving]
• [Smart Energy Saving]: Automatically adjust the brightness of the screen according to the brightness of the picture
to save energy.
- [On]: Enable the Smart Energy Saving feature.
- [Off]: Disable the Smart Energy Saving feature.
• [Brightness Control]: Adjust the brightness of the screen to save energy.
- [Off]: Disable the Brightness Control function.
- [Minimum/Medium/Maximum]: Use energy saving according to the energy saving level set for the monitor.
- [Screen Off]: Turn off the screen after 3 seconds.
• [Brightness Scheduling]: Adjust the backlight at specified times.
- You can set this feature to [On]/[Off].
- Add schedule by setting the schedule time and backlight value.
- If the current time has not been set, [Brightness Scheduling] is disabled.
- You can add up to six schedules, and they are sorted in ascending order by time.
- You can delete a schedule by selecting it from the list and pressing the [OK] button.
[Adjust (RGB-PC)]
This feature enables you to configure the PC display options in RGB mode.
• [Auto Config.]: Automatically adjust the screen position, time, and phase. The image displayed on the screen can be
unstable for a few seconds in the process of the configuration.
• [Resolution]: Enabled when the V resolution is 768, 900/960 or 1050. The detailed resolution options are available.
(The range of the available resolution is shown in the table below.)
768
1024 x 768
1280 x 768
1360 x 768
1366 x 768
• [Position]/[Size]/[Phase]: Adjust the options when the picture is not clear, especially when characters are shaky, after
the auto configuration.
• [Reset to Initial Settings]: Resets the options to default.
[Advanced Setting]
900/960 1050
1280 x 960 1400 x 1050
1440 x 900 1680 x 1050
1600 x 900
21