[Reset To Initial Settings]; [Ez Download]; [Factory Reset] - LG L18 User Manual

[IR Operation Lock]
• If you set this feature to [Off (Normal)], you can use your remote control.
• If you set this feature to [On (Power Key Only)], you can only use the power key.
• If you set this feature to [On (Block All)], you cannot use your remote control.
[Local Key Operation Lock]
• This feature enables you to configure the Local Key Operation Lock feature so that settings or content cannot be
changed.
• If you set this feature to [Off (Normal)], you can use the local keys on the monitor.
• If you set this feature to [On (Power Key Only)], you can only use the power key.
• If you set this feature to [On (Block All)], you cannot use the local keys.
NOTE
• If [IR Operation Lock] and [Local Key Operation Lock] are both set to [On (Block All)], [General] > [Power] > [Power
On Status] value switches to 'PWR. ' Changing this value is not impossible to ensure the correct powering on
operation. (To prevent mistakes by the user)
• If [IR Operation Lock] is set to [On] (Power Key Only, Block All), you can go to the menu screen by pressing and
holding the Settings key for more than 5 seconds and entering the password.

[Reset to Initial Settings]

[Admin]
Reset all data except for the items (languages, screen direction, inputs, time and power)

[Ez Download]

[Admin]
Users can easily download Software Update, Logo Image, No Signal Image, Data Cloning and etc. from Ez Download.

[Factory Reset]

[Admin]
This feature resets the items applicable for Reset to Initial Settings, Date, Time, Language, Network IP, and the Input
Label Internal Storage files.
However, Calibration mode's RGB gain is an exception.
[Reset to Initial Settings]
[Ez Download]
[Factory Reset]
25