Download Print this page

Festool SYSLITE KAL II Original Operating Manual page 9

Hide thumbs Also See for SYSLITE KAL II:

Advertisement

Original operating manual
The specified illustrations appear at the
beginning of the Operating Instructions.
1
Symbols
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating
instructions and safety
notices!
CAUTION! Do not look
directly into the light
beam!
Warning against magnetic
field!
Prohibited for people with
pacemaker
Risk of pinching fingers
and hands!
Do not dispose of as
domestic waste.
2
Safety informations
Warning! Read all safety warn-
ings, instructions, illustrations
and specifications provided with
this tool. Failure to follow all instruc-
tions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
– Handle the working light with care.
The working light may generate heat
that increases the risk of fire and
explosions.
– Never use the working light in po-
tentially explosive environments.
– Do not cover the working light when
switched on. The working light heats
up during operation and can burn the
surface of the skin.
– Warning against harmful
light radiation. Do not look
into the GBlight beam for long
periods. Do not direct the
light beam towards other people or
animals. Optical radiation can
damage the eyes.
– Do not use the working light for road
lighting applications. The working
light is not approved for illuminating
the road.
– Always use compatible Festool
battery packs in the working light.
Using other battery packs poses a
fire hazard and may cause personal
injury.
– Have your device repaired by quali-
fied specialist staff and always use
original spare parts to ensure that
your device operates reliably. The
light source contained in this lumi-
naire shall only be replaced by the
manufacturer or his service agent or
a similar qualified person.
– Always use original Festool parts for
repair and maintenance. The use of
incompatible accessories or spare
parts can result in electric shocks
or other injuries.
– When charging the working light,
do not use charging adapters from
other manufacturers. Otherwise,
there is a danger of fire and explosion.
KAL II
9

Advertisement

loading