Page 1
Festool GmbH Wertstraße 20 D-73240 Wendlingen Tel.: +49 (0)7024/804-0 Telefax: +49 (0)7024/804-20608 www.festool.com 사용 설명서 원본 Original operating manual S Y S L I T E KAL II...
Page 5
– 작업등을 가로등 용도로 사용하지 사용 설명서 및 안전 마십시오. 작업등은 가로등용으로 표지를 확인하십시오. 승인되지 않았습니다. – 작업등에서는 호환 가능한 Festool 주의! 조명을 직접 보지 배 터 리 팩 을 사 용 하 십 시 오 . 다 른 마십시오. 배터리팩을 사용하면 화재의 위험이...
Page 6
불을 끄시기 바랍니다. 기술자료 소형 작업등 KAL II 정격 전압/(리튬이온) 배터리 용량 7.2 V = / 2.9 Ah 외부 Festool 배터리팩의 정격 전압 10.8~18 V= 7.2~18 V= 충전 소켓 전압 범위 조명 장치 12 x 1.5 W 전원 LED 최소 조명: 1단계(30 %) 5시간...
Page 7
다 시 니다. 누르십시오. 충전 표시등이 일반 LED 주황색 모드로 전환합니다(6.1장 참조). 정전 모드입니다(6.5장 참조). 6.6 외부 Festool 배터리팩을 이용한 6.2 전원 스위치 [1-2] 작동 [2A] + [2B] 전원 스위치 [1-2]에는 3개의 설정이 작업등에서 BPC 또는 BPS 시리즈의 있습니다. Festool 배터리팩을 이용할 수 있습니다.
Page 8
고객 서비스 및 수리 접이식 손잡이를 이용하면 비계 등의 제조사 또는 서비스 센터에 구조물에 작업등을 걸 수 있습니다. 서만 정식 고객 서비스와 작업등에서 외부 Festool 배터리 수리 서비스가 제공됩니 팩을 사용하려면 손잡이를 미리 다. 다음 주소에서 가까운 접어야 합니다 [2A].
Page 9
Safety informations manufacturer or his service agent or a similar qualified person. Warning! Read all safety warn- – Always use original Festool parts for ings, instructions, illustrations repair and maintenance. The use of and specifications provided with incompatible accessories or spare this tool.
Compact working light KAL II Rated voltage / capacity of integral battery (Li-ion) 7.2 V = / 2.9 Ah Rated voltage with external Festool battery pack 10.8 – 18 V = 7.2 – 18 V = Charging socket voltage range Lighting device 12 x 1.5 W Power LED...
Page 11
KAL II Machine features LED red - flashing General fault indication, e.g. incomplete [1-1] Charging state indicator LED contact, short circuit, battery faulty. [1-2] ON/OFF switch with 3 settings LED red - continuous light [1-3] Folding attachment handle [1-4] Connecting socket for charging Battery temperature is outside the adapter permitted range.
Page 12
6.6 Operating with external Festool Only use the magnetic foot for securing battery pack [2A] + [2B] the Festool working light using one of The working light can operate with the options described below: any Festool battery pack from the BPC Screw on magnetic foot at the tripod or BPS series.
Page 13
KAL II – Always clean the plastic cover on the Environment working light using a soft, dry cloth Prior to disposal to prevent any damage. Do not use solvents. Remove the integral bat- – Keep the contacts on the working tery from the device! Dis- light and battery pack clean.