Related Manuals for SWIT Electronics BM-U Series
Summary of Contents for SWIT Electronics BM-U Series
- Page 1 SWIT ELECTRONICS CO., LTD. BM-U 4K High Definition Monitor Model: BM-U175/245/275HDR User Manual Please read this user manual throughout before using Ver： A...
-
Page 2: Preface
All internal technologies of this product are protected, including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative trademarks in this user manual are the property of their respective owners. -
Page 3: Maintenance
Maintenance Warning 1. In order to reduce the risk of fire and electrical shock, do not lay this product in rain or damp places. 2. Please keep away from the strong magnetic field; it may cause the noise of the video and audio signals. -
Page 4: Table Of Contents
Contents Preface. Maintenance Contents Packing List Introduction Operation Introduction Front panel Rear panel Main Menu Size Specification Trouble-Shooting Packing list details standard package monitor user manual warrantee card Battery plate （ V-mount or Gold mount option ） tabletop stand power cord ※... -
Page 5: Operation Introduction
Operation Instructions ·Front panel (11) (1) (2) (4) (5) (7) (8) (9) (10) (1) Speaker: For SDI/HDMI embedded audio. (Will not work if earphone is plugged in) (2) Desktop Stand Feet (3) U1~U4: User shortcut key, which can be used to quickly enter the set user mode. Long press tosave user settings. - Page 6 Source Brightness Contrast Saturation 1080P SDI 1 (SDI2 IN) (SDI1 IN) SDI 2 SDI 3 SDI 4 2-SI 1080I 1080PsF Backlight Volume Source HDMI (SDI4 IN) (SDI3 IN) Four-Screen Press Brightness, Contrast, Saturation, Backlight, Volume five shortcut keys confirm to select this option, and rotate Menu to adjust the corresponding item value directly.
-
Page 7: Rear Panel
·Rear panel (10) (11) (12) （1） SFP IN: Optical fiber interface 12G/6G/3G/HD/SD-SDI video signal fiber input interface Fiber optic module is optional ● （2） SDI OUT1/IN1,SDI OUT2/IN2:12G-SDI （3） SDI OUT3/IN3,SDI OUT4/IN4:3G-SDI （4） ETHERNET: Network interface 1000M high-speed RJ45 Ethernet port, for web server IP external control. （5）... -
Page 8: Osd
·OSD TC 00:15:13:07 CAMERA 1 Mg75 Mg75 Cy75 Cy75 YI75 YI75 Delta = 1.0 Delta = 0.0 in phase （9） ⑴ Time Code （ SDI） Under SDI input, the monitor can display Time code information (LTC, VITC1&2). If no Time code info is detected, it will display “TC UNLOCKED”... - Page 9 ·Status display Status Format Exit&Status > Channel Input > Color Temp Picture > Scanning XXXX Color Management > Scanning > Control > Assist > De-embed > Auto Calibration > Version System > Press “Menu/Enter” button, the main menu will pop up from the left top of the screen. The main menu displays the current working status of the monitor.
-
Page 10: Main Menu
Key configuration. Steps 1. Press “Menu/ Enter” button, the main menu will pop up from the left top of the screen. The selected main menu highlights in yellow . 2. Revolve “Menu/ Enter” to select submenu, the selected submenu highlights in yellow, press “Menu/ Enter”... - Page 11 Menu Block Diagram Format Channel Exit Color Temp Input range MENU YUV Color Matrix Red Gain Green Gain Exit Exit&Status Blue Gain Color Gamut Red Bias Version Gamma Green Bias SoftClip Blue Bias HLG System Gamma Input Reset D-Log to 709 Exit D-Log to PQ Exit...
- Page 12 Menu Configuration Menu configuration introduces the main menu and each sub-menu. Menu items marked * will give more detailed menu description or operation explanation after the list 1. Input ‒ Set the color of input audio Menu Item Menu Description Value Input Range *1 Set the input range for input audio...
- Page 13 Gamut and gamma OFF,ARRI_LogC_HLG,Canon_CLog2Cin_HLG values are Camera table when gamut is set to Canon_CLog3Cin_HLG,Panasonic_VLog_HLG, D-Log to HLG set to menu Rec.2020 and gamma value is HLG1000 RED_L3G10_HLG,Sony_SLog3_Cin_HLG, items with Sony_SLog3_SG3_HLG specific values Set the color temperature value displayed 2000K~10000K,D55,D65,D75,D93,USER1,USER2 Color Temp on the screen Set the user color temperature value when the color temperature mode is selected as...
- Page 14 *6.Import Place the cube file that needs to import the monitor in the root directory of the u-disk, insert the u-disk into the USB interface on the front shell of the monitor, and choose to import the corresponding file. 4. Scanning—Setting for picture scan, zoom, flip, etc. Menu Item Menu Description Value...
- Page 15 5.Control—Setting for TALLY, UMD, IP control to the monitor Value Menu Description Menu Item OFF,ON GPI control *1 Open or close GPI control GPI 1Pin SFP, SDI1, SDI2, SDI3, SDI4, 4×SDI(2-SI)、 4×SDI(SQ), HDMI, Red Tally, Green Tally, GPI 2Pin Yellow Tally ,Time Code, Freeze Frame, GPI 3Pin Set the function of each WFM Type, WFM Single Line, UMD,...
- Page 16 *1 GPI control Connect the GPI remote control terminal through the GPI interface on the real panel of the monitor, turn on “GPI control” and set the function of GPI 1-6 buttons. The GPI control allows you to control both the Tally light and the on screen TALLY light on at the same time: *2 UMD Select the display type as “UMD”...
- Page 17 Cascade: 6. Assist— Setting for Vector scope and Histogram patterns. Menu Item Menu Description Value False Color Turn false color display on or off OFF, ON Blue Only Turn blue only on or off OFF, ON Turn on or off focus assist and adjust the Focus Assist OFF, Blue, Red color of the focus assist...
- Page 18 *1 WFM Single Line Open waveform single-line mode, the monitor shows only one line of audio waveform. Rotate the Menu/Enter knob to select the number of lines of audio signal to display the waveform. (The selection range of the number of lines in a waveform depends on the current signal standard) Line:210 WFM Single Line：...
- Page 19 Type 1 Type 2 Audio alarm information 1 2 3 4 5 6 7 8 910111213141516 R -13DB 02CH L -32DB 01CH Left Channel:1 Green Right Channel:2 Red *3. H/V Delay H/V Delay is not displayed on HDMI channel. 8. Auto Calibration*1 Menu Item Menu Description Value...
- Page 20 Auto Calibration Please make sure the monitor is in dark room,and the sensor probe is put in the center marker and close Auto Calibration Please make sure the monitor is in to the screen. dark room,and the sensor probe is put in the center marker and close to the screen.
- Page 21 9. System— User profile saving, firmware update. Menu Item Menu Description Value Set lock key OFF, Full Lock Key Lock *1 Select make user mode current Recall Profile Factory,USER1,USER2,USER3,USER4 USER1,USER2,USER3,USER4 Save Profile Save the current state as a user setting Open or close low latency mode Low Latency Mode*2 OFF, ON...
- Page 22 *2 Recall Profile/ Save Profile User Settings provide 4 menu Settings, that is, users can save the current monitor menu Settings as one user Settings (USER1~USER4) according to usage habits. Then, when switching menu Settings, just select the corresponding "USER1~USER4" through the “Recall Profile” item to display the corresponding menu Settings.
- Page 23 *4 IP control Connect the monitor to the LAN through an ETHERNET interface, and the Monitor can be controlled by web page. Pin No Pin Name Enter Menu- System ‒ IP/Net Mask/Gateway/Port to set the monitor address. Set the computer Ethernet IP addresses at the same LAN environment as the Monitor.
- Page 24 Used crossed wired cable for computer-monitor directly connection. ◎ Use straight-through wired cable for Router connections. ◎ please seek help from your webmaster for any network connections. ◎ *4.Upgrade System software can update by USB interface, and steps are as follows: 1.Download the latest software package into the U-disk root direction.
-
Page 25: Size
Size Monitor （unit： mm） 436.02 41.20 91.13 15.00 15.00 BM-U175 100.00 30.59 145.00 224.00 314.00 41.20 580.90 91.13 15.00 15.01 BM-U245 100.00 30.60 145.00 322.00 412.00 652.30 41.20 91.13 15.00 15.00 100.00 BM-U275HDR 200.00 30.60 382.00 145.00 472.00 ※ BM-U175, BM-U245 has battery plate in the back, support battery powering. BM-U175, BM-U245 can install 100*100 pitch-row VISA bracket. -
Page 26: Specification
Specification LCD Performance Model BM-U175 BM-U245 BM-U275HDR Size 17.3 23.8 Display area 381.88×214.82mm 527.04×296.46mm 596.74×335.66mm Resolution 3840*2160 3840*2160 3840*2160 Display Color 16.7M 1.07G 1.07G Display ratio 16:9 16:9 16:9 Brightness 1000 Contract 800:1 1500:1 1400： 1 Viewing Horizontal/ Vertical： Horizontal/Vertical： Horizontal/Vertical：... - Page 27 Supported Format： Signals below can display on the monitor Input terminal Signal format shown in the Status Display as Format SDI1/2 Quadlink SDI 3/4 HDMI SDI&SFP HDMI &SFP — 720×480/60I — 720*480I60 720*480I60 √ √ 720×480/60P — 720*480P60 720*480P60 √ —...
- Page 28 Input terminal Signal format shown in the Status Display as Format Quadlink SDI1/2 HDMI SDI 3/4 SDI&SFP HDMI &SFP 2048×1080/59.94P 2048*1080P59.94 2048*1080P60 √ — √ √ 2048×1080/60P 2048*1080P60 2048*1080P60 √ — √ √ 3840×2160/23.98P 3840*2160P23.98 3840*2160P24 — √ √ √ 3840×2160/24P 3840*2160P24 3840*2160P24...
-
Page 29: Trouble-Shooting
Trouble-shooting symptom Possible causes Solution Please check if the power is connected, and then The power is not turned on press “POWER” button to turn on the monitor Reconnect to power supply Unstable power voltage BNC or HDMI cable loose contact or not correctly Check and correctly connect the BNC or HDMI cable connected... - Page 30 SWIT Electronics Co., Ltd. Add: 10 Hengtong Road, Xin'gang, Nanjing Economic and Technological Development Zone, Nanjing 210038, P.R.China Tel: +86-25-85805753 Email: contact@swit.cc SWIT Electronics Europe GmbH Add: Hochstr. 17, 47228 Duisburg, Germany Tel: +49(0)20659799339 Email: info@swit-europe.com SWIT Electronics America, Inc Add: 3350 Scott Boulevard 61-02, Santa Clara, CA 95054, USA Tel: (408)260-8258, 1-866-986-SWIT(7948) Email: info@swit.us...
Need help?
Do you have a question about the BM-U Series and is the answer not in the manual?
Questions and answers