Radio Reception; Tuning To Radio Stations; Programming Radio Stations; Automatic Programming - Philips DC146/05 User Manual

STANDBY-ON
MIC RO S Y STE M DC14 6
iR
CD/CD - R/CD - RW COMPATIBLE
SOURC E
PRESE T
DOCK

Tuning to radio stations

1
Press SOURCE on the set repeatedly or press
TUN on the remote control repeatedly until
the desired waveband (FM or MW) is displayed.
2
Press down on TUNING 4 ¢ (4 /
¢ on the remote control) and release the
button.
➜
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SrcH.
3
Repeat step 2 if necessary until you find the
desired station.
● To tune to a weak station, press TUNING 4
¢ (4 / ¢ on the remote control)
briefly and repeatedly until you have found
optimal reception.

Programming radio stations

You can store up to a total of 20 radio stations
in the memory.

Automatic programming

Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memory already.
VOL
TUNING REPEAT DBB
VOL

Radio Reception

1
Press PRESET + + /- + + +
number where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press PROG. for more than 2 seconds to
activate programming.
➜
"AUtO" is displayed and available stations are
programmed in order of waveband reception
strength. The first preset automatically stored will
then be played.

Manual programming

1
Tune to your desired station (see Tuning to radio
stations).
2
Press PROG to activate programming.
➜
flashes in the display.
PROG
3
+ +
Press PRESET + + + /-
from 1 to 20 to this station.
4
Press PROG again to confirm the setting.
➜
disappears, the preset number and the
PROG
frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.

Tuning to preset radio stations

●
Press PRESET + + + + + /-
station is displayed.
- to select the preset - - -
- -
- to allocate a number -
- until the desired preset - - -
13