Cd Operation; Loading A Disc; Basic Playback Controls - Philips DC146/05 User Manual

STANDBY-ON
MIC RO S Y STE M DC14 6
iR
CD/CD - R/CD - RW COMPATIBL E
SOURC E
PRESE T
DOCK
IMPORTANT:
The lens of the CD player should never be
touched.

Loading a disc

This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
●
CD-ROM, CD-I, CDV, MP3 CD, VCD, DVD or
computer CDs, however, are not possible.
1
Select CD source.
2
Lift the CD door on the top
of the system to open the CD
compartment.
➜
"OPEn" is displayed when
you open the CD
compartment.
3
Insert a disc with the printed side facing up and
press down on PULL TO OPEN to close the
CD door.
➜
"rEAd" is displayed as the CD player scans
the contents of a disc, and then the total number
of tracks is shown.
VOL
TUNING REPEAT
DBB
VOL
PULL TO OPEN

CD Operation

Basic playback controls

To play a disc
●
Press 2; to star t playback.
➜
The current track number and the PLAY icon
are displayed during disc playback.
To select a different track
● Press TUNING 4 ¢ (on the remote
control 4 / ¢) once or repeatedly until
the desired track number appears in the display.
To find a passage within a track
1
Press and hold down on TUNING 4 ¢
(on the remote control 4 / ¢).
➜
The disc is played at high speed and low
volume.
2
When you recognise the passage you want,
release TUNING 4 ¢ (on the remote
control 4 / ¢).
➜
Normal playback continues.
To interrupt playback
●
Press 2; during playback.
➜
The display freezes and the PLAY icon flashes
when playback is interrupted.
➜
To resume, press 2; again.
To stop playback
● Press 9.
Notes: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TUNER, iPod or AUX.
– you select standby.
11