Advertisement
Available languages
Available languages
EN
FR
ES
Switching the HDMI 4K Signal Format Input and Output by this Unit
When an AV component such as a TV or player that supports HDMI 4K is
connected to this unit, you can switch the 4K signal format that is input/output by
this unit.
Perform the following procedure when the unit is on.
1. While pressing SOUND RETRIVER on the main unit, press AUTO/DIRECT
to display the current setting on the display. While this is being displayed,
while pressing SOUND RETRIVER on the main unit, repeatedly press AUTO/
DIRECT to switch the setting.
Enhanced
Select when the AV component connected to this unit,
such as a TV or player, and the HDMI cable (*) supports
the high-definition 4K signal formats (4K 60p 4:4:4, 4:2:2
and 4K 60p 4:2:0 10 bit).
• There may be some image disruption depending on
the connected component and the HDMI cable. If this
occurs, switch to "Standard".
Standard
Select when the AV component connected to this unit,
such as a TV or player, supports the standard 4K signal
format (4K 60p 4:2:0 8 bit).
(*) When setting to "Enhanced", use Premium High Speed HDMI Cable or
Premium High Speed HDMI Cable with Ethernet that have the "PREMIUM
IT
DE
NL
SV
JP
JP
繁中
Certified Cable" label attached to the packaging.
2. To exit the settings, release your finger. After a few seconds, the display goes
out and the switching is complete.
Settings and the corresponding resolutions
4K (3840×2160p) 24/25/30 Hz
4K SMPTE (4096×2160p) 24/25/30 Hz
4K (3840×2160p) 50/60 Hz
4K SMPTE (4096×2160p) 50/60 Hz
Enhanced Standard
8 bit
RGB/
YCbCr4:4:4
10/12 bit
YCbCr4:2:2
12 bit
RGB/
8 bit
YCbCr4:4:4
YCbCr4:2:2
12 bit
8 bit
YCbCr4:2:0
10/12 bit
Advertisement
