Environmentally Safe Battery Disposal; Troubleshooting - Craftsman 151.98835 Operator's Manual

60v max* lithium-ion cordless chainsaw
Table of Contents

Advertisement

Available languages

Available languages

ENVIRONMENTALLY SAFE BATTERY DISPOSAL

The following toxic and corrosive
materials are in the batteries used in this
battery pack:
Lithium-Ion, a toxic material.
WARNING!
All toxic materials must be
disposed of in a specified manner to prevent
contamination of the environment. Before
disposing of damaged or worn out Lithium-
Ion battery packs, contact your local waste
disposal agency, or the local Environmental
Protection Agency for information and specific
instructions.
WARNING!
If the battery pack cracks
or breaks, with or without leaks, do not
recharge it and do not use. Dispose of it and
replace with a new battery pack.
DO NOT ATTEMPT TO REPAIR IT!
PROBLEM
Bar and chain
running hot and
smoking.
Motor runs, but
chain is not
rotating.
Motor runs,chain
rotates but does
not cut.

TROUBLESHOOTING

POSSIBLE CAUSE
1. Check chain tension for
over-tight condition.
2. Chain-oil tank empty.
1. Chain tension too tight.
2. Check guide bar and
chain assembly.
3. Check guide bar and
chain for damage.
1. Dull chain.
2. Chain on backwards.
To avoid injury and risk of fire, explosion, or
electric shock, and to avoid damage to the
environment:
■ Cover the battery terminals with heavy-duty
adhesive tape.
■ DO NOT attempt to remove or destroy any
of the battery pack components.
■ DO NOT attempt to open the battery pack.
■ If a leak develops, the released electrolytes
are corrosive and toxic. DO NOT get the
solution in the eyes or on skin, and do not
swallow it.
■ DO NOT place these batteries in your
regular household trash.
■ DO NOT incinerate.
■ DO NOT place batteries where they will
become part of any waste landfill or municipal
solid waste stream.
■ Take batteries to a certified recycling or
disposal center.
1. Adjust the chain tension.
2. Refill with the correct oil.
1. Retension chain, Refer to
SAW CHAIN TENSIONING
earlier in this manual.
2. Refer to Replacing Bar and
Chain earlier in this manual.
3. Inspect guide bar and chain
for damage.
1. Sharpen chain.
2. Reverse direction of chain.
26 ― English
SOLUTION

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents