Assembly - Craftsman 151.98835 Operator's Manual

UNPACKING
This product has been shipped completely
assembled.
■ Carefully remove the product and any
accessories from the box. Make sure that all
items listed in the packing list are included.
Do not use this product
WARNING!
if any parts on the Packing List are already
assembled to your product when you unpack
it. Parts on this list are not assembled to the
product by the manufacturer and require
customer installation. Use of a product that
may have been improperly assembled could
result in serious personal injury.
■ Inspect the product carefully to make sure
no breakage or damage occurred during
shipping.
■ Do not discard the packing material until
you have carefully inspected and satisfactorily
operated the product.
■ If any parts are damaged or missing, do not
operate the product. Return it for replacement
to the retailer from which it was purchased.
151.98835 PACKING LIST
60V Cordless Chainsaw with Bar, Chain
and Scabbard
(1) 60V Max* 2.0 Ah Lithium-Ion Battery
(1) 60V Max* Battery Charger
Operator's Manual

ASSEMBLY

BATTERY
IMPORTANT! The battery pack is not
charged when it is purchased. Before using
the chainsaw read all safety precautions, and
follow the instructions in the Battery Pack
And Charger section. With regular use, it will
need shorter charging time. If storing for a
prolonged period of time, remove the battery.
When ready to use again, charge the battery
pack for at least 70min again.
WARNING!
or missing do not operate this product until
the parts are replaced. Use of this product
with damaged or missing parts could result in
serious personal injury.
WARNING!
this product or create accessories not
recommended for use with this product. Any
such alteration or modification is misuse and
could result in a hazardous condition leading
to possible serious personal injury.
WARNING!
starting that could cause serious personal
injury, always remove the battery pack from
the product when assembling parts.
CHAIN AND GUIDE BAR ASSEMBLY
The saw chain and guide bar are
pre-assembled at delivery. Inspect and
re-assemble them before operation if
necessary.
Use only the guide bar and saw chain listed
in the Product Specifications of this manual.
To remove and replace bar and saw chain,
refer to REPLACING THE GUIDE BAR AND
CHAIN in the CARE AND MAINTENANCE
section of this manual.
NOTE: BAR & CHAIN OIL NOT INCLUDED.
BAR & CHAIN OIL MUST BE ADDED
PRIOR TO USE.
11 ― English
If any parts are damaged
Do not attempt to modify
To prevent accidental