Before Start-Up - Tout Terrain STREAMLINER Manual

BEFORE STARTUP
Important: The Streamliner is is designed for
cycling and rough terrain. Using it requires
a certain degree of experience and confidence
cycling in these conditions.
You should take the following points into
consideration before using the Streamliner
with a child:
• Test some routes with the Streamliner be-
fore using them with a child for the first time.
• Beginners should avoid using the Streamlin-
er off-road.
• Riding with a trailer alters the handling of
the bicycle, and the braking effectiveness is
reduced considerably compared to riding
without a trailer. Braking distance is also
increased compared to riding without a
trailer attached.
• Your bike should be in good working order,
especially the brakes. This will help to ensure
your safety.
ASSEMBLY
• Insert the draw-bar into the frame, then
insert the cotter pin (see picture in
Startup/2.). Align the frame and draw bar,
then tighten both frame bolts to 9 Nm.
• Attach the handlebar to the stem and tighten
bolts to 5 Nm. Pay attention to ensure
correct brake and shift cable routing.
Check the handlebars for torsional stability.
• Fasten the shift and brake cables with the
included cable ties.
• Install the seat post with grease or assembly
paste. Tighten the seat post clamp to 9 Nm
and make sure components are secure.
• When mounting the pedals, pay attention to
the respective mounting side and markings.
Apply grease to the pedal axle threads and
mount the pedals with a maximum torque
of 25 Nm.
STARTUP
Important: Never ride without having
checked points 1 – 2 below.
1. Ensure that the quick release fastener at the
rear wheel is closed.
2. Insert the safety pin through the frame AND
drawbar.
7