Table of Contents
Advertisement
SAFETY INFORMATION
Please read the user manual and safety instructions carefully before using the appliance.
•
For 12V Deep Cycle Lead Acid based Batteries only 80-300Ahr
•
For unregulated 12V nominal Solar Panels only: Voc <25V (25A DC-DC/MPPT model only)
•
NOT for under bonnet installation
•
Install AWAY from flammable fumes, external heat sources, liquids and protected from oil,
grease, dust & weather
•
Ensure good VENTILATION around the unit
•
Disconnect the BATTERY supply and take care when installing power cables
•
Do NOT cut the Aux Battery Temperature Sensor wire. Unit will be inoperable if it is dam-
aged
•
Ensure the unit is well secured to the chassis of the vehicle
• Fuses are NOT supplied.
• Attach the Aux Battery Temp Sensor to the negative - Terminal.
• Multi-Chemistry Battery Selection Wires – only fit 1 wire to Aux Battery positive +
terminal. Tape up the other 2 wires.
2
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AKEP-DC20A_01 and is the answer not in the manual?
Questions and answers