Table of Contents
Advertisement
Quick Links
1
1
®
© 2004 Medion
. All rights reserved.
Trademarks:
MS-DOS and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
Other trademarks are the property of their respective owners.
®
Medion
makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose.
®
Medion
shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, perform-
ance, or use of this material.
®
Medion
assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Medion
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photo-
copied, reproduced, or translated to another language without the prior written consent of Medion
The information in this document is subject to change without notice.
9
I
9
I
N
C
H
N
C
H
L
C
D
L
C
D
F
P
F
P
L
A
T
L
A
T
M
M
O
N
I
T
O
N
I
T
A
N
E
L
A
N
E
L
O
R
O
R
®
.
®
.
Advertisement
Table of Contents
Related Manuals for Medion MD 41079
Summary of Contents for Medion MD 41079
- Page 1 Medion assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Medion This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photo- copied, reproduced, or translated to another language without the prior written consent of Medion ®...
-
Page 2: Table Of Contents
Contents: SAFETY AND PRECAUTIONS ....................1 Operating Safety ......................... 1 Repair..........................1 Point of Use ........................1 Environmental Conditions ....................2 Connecting........................2 Standards/Electro-Magnetic Compatibility ................2 Precautions ........................3 Important Additional Safety Instructions ................3 FCC Compliance Statement ....................4 Declaration of Conformity .................... -
Page 3: Safety And Precautions
Please read through this section carefully and follow the instructions given. This will help ensure reli- able operation and a long life for your LCD monitor. Always keep these instructions handy and close by your LCD monitor. Keep the instructions and the packaging so that if you sell or give away your LCD monitor you can give them to the new owner. -
Page 4: Environmental Conditions
NVIRONMENTAL ONDITIONS • The LCD monitor can be operated at an ambient temperatures of between +41°F and +95°F (5° C to 35° C) and at a relative humidity of between 20% and 80% (without condensation). • When switched off, the monitor can be stored at between 14°F and +140°F (-10° C - +60° C), up to the maximum height of 39,000 ft (12,000 m) above sea level at a relative humidity of between 20% and 80% (without condensation). -
Page 5: Precautions
LECTRICAL AFETY EN 60950 Safety of information technology equipment. • The connection of devices is limited to equipment that complies with EN60950 “Safety of information technology equipment” or EN60065 “Audio, video and similar electronic apparatus. Safety requirements” • For U.S. / Canadian purposes: The PC should only be connected to equipment which complies with UL 60950 / CAN CSA 22.2 No 60950 RANSPORT AND ECYCLING... -
Page 6: Fcc Compliance Statement
The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §§15.101 to 15.109. Trade Name: Medion Type or Model Number: MD 41079 Party Responsible: MEDION AG Executed on (Date), at (Place): of July, 2004, Essen... -
Page 7: Getting Started
First read the chapter “Safety and Precautions” starting on page 1. 1: P REPARE OMPUTER If you have operated your computer previously with a CRT monitor, it will be necessary for you to make a few preparations before connecting your LCD monitor. This is required when your previous monitor was operated with settings which are not supported by your new LCD monitor. -
Page 8: Changing Basic Pc Display Settings
PC D HANGING ASIC ISPLAY ETTINGS 1. Open Display Properties as described in the previous section. 2. Select the Settings tab. 3. Use the drop-down menu under Color quality to set the color depth (number of colors dis- played). Your monitor supports a maximum color depth of 16 million colors corresponding to 32 bit or "True Color“. -
Page 9: Step 2: Attach The Monitor Base
2: A TTACH THE ONITOR Mount the monitor stand as shown in the diagram. Perform this step before connecting the monitor. 3: C ONNECT THE ONITOR Ensure that the LCD monitor is not yet plugged in and neither the LCD monitor nor the computer is switched on before continuing. -
Page 10: Step 4: Set The Monitor Angle
4: S ET THE ONITOR NGLE Your LCD Monitor is designed to allow you to adjust it to an optimal viewing angle. 5: P ERFORM AN DJUSTMENT Press the Auto button on the front of your monitor. This automatically adjust your monitor settings for optimal image quality. - Page 11 Hand support rest: 2” – 4” Top line of screen should be at eye level or a little beneath Eye’s distance to screen: 20” – 28” Legroom (vertical): at least 26” Legroom (horizontal): at least 24” This illustration should give you a guide- line for an ergonomic workplace.
-
Page 12: Controls
AUTO Auto Adjustment Automatically adjusts the monitor settings for optimal image quality. Decrease volume Press this button to decrease the speaker volume. Minus When the OSD is active, use this button to move down/decrease selection. Increase volume Press this button to increase the speaker volume. Plus When the OSD is active, use this button to move up/increase selection. -
Page 13: Advanced Settings
You can change advanced settings for your LCD monitor using the On Screen Display (OSD) menu. Before adjusting settings using the OSD, you should perform an auto adjustment by pressing the Auto button. OSD M (actual screen image may differ slightly from examples) Sub-menu User setting Main menu... -
Page 14: Service
DDITIONAL UPPORT If the suggestions in the above section have not solved your problem, please contact Medion Customer Care. Our fast and friendly customer care staff will help you over the telephone. Please have the follow- ing information available when you call:... -
Page 15: Warranty
MEDION has marketed this product. The level of warranty service you receive may vary according to local standards. MEDION will not alter form, fit or function of the product to make it operate in a country for which it was never intended to function.