Subscribe to Our Youtube Channel
Related Manuals for Medion ERAZER Spectator X20
Summary of Contents for Medion ERAZER Spectator X20
- Page 1 Operating instructions 80 cm (32“) FHD Curved Monitor MEDION ERAZER ® ® Spectator X20 (MD 22093)
-
Page 2: Table Of Contents
Contents About these operating instructions ............5 1.1. Key to symbols ....................... 5 Proper use ....................6 Declaration of Conformity ................7 3.1. Trademark information ..................7 Safety information ..................8 4.1. Operating safety ....................8 4.2. Installation location ..................... 9 4.3. -
Page 3: About These Operating Instructions
1. About these operating instructions Read these operating instructions carefully and comply with the infor- mation provided in them. This will ensure that your device works reliably and has a long service life. Always keep these operating instructions close to the device. Keep these operating instructions in a safe place so they can be passed on to the new owner if you decide to sell the device. -
Page 4: Proper Use
2. Proper use The TFT monitor is used to play back video and audio signals from external devices, such as computers, that have connections and image resolutions matching the technical specifications of the TFT monitor given here. Any other use is considered to be improper. -
Page 5: Declaration Of Conformity
3. Declaration of Conformity Medion AG hereby declares that this device complies with the fundamental require- ments and the other relevant provisions of: • EMC Directive 2014/30/EU • Low Voltage Directive 2014/35/EU • Ecodesign Directive 2009/125/EC However, this device is not equipped with full functionality to minimise con- sumption according to the Ecodesign Directive. -
Page 6: Safety Information
4. Safety information 4.1. Operating safety • This device may be used by children over the age of 8 and by persons with limited physical, sensory or mental abilities or by those without experience and knowledge, if they are su- pervised or have been instructed in the safe use of the device and have understood the dangers that result from it. -
Page 7: Installation Location
4.2. Installation location • Keep your monitor and all connected devices away from moisture and avoid dust, heat, direct sunlight and naked flames (such as candles, for instance). Non-compliance with these instructions can lead to faults or damage to the moni- tor. -
Page 8: Repairs
4.3. Repairs • Contact customer services if: – the mains cable is burnt or damaged – liquid has penetrated the monitor – the monitor is not operating correctly – the monitor has fallen or the housing is damaged. • Repairs to your monitor should only be carried out by quali- fied specialists. -
Page 9: Power Supply
4.5. Power supply DANGER! Risk of electric shock! Even when the device is switched off, some compo- nents are live. In order to disconnect the power to your monitor or to completely isolate the device from voltage sourc- es remove the mains plug from the socket. •... -
Page 10: Mains Adapter
4.6. Mains adapter • Use only the mains adapter supplied. • If the housing of the mains adapter or the power cable is damaged, the mains adapter must be disposed of and re- placed with a new mains adapter of the same type. •... -
Page 11: Device Overview
6. Device overview 6.1. Front Monitor stand Screen Multifunction button − Press the button: switch monitor on/switch to standby mode − Move left: return to the previous menu/close menu; − Move right: open menu/submenu; select option; confirm selection − Move backward: navigate up in the menu; increase set value/select op- tion;... -
Page 12: Rear
6.2. Rear DC IN HDMI 1 HDMI DC IN – Connection for power supply HDMI 1 – HDMI port HDMI 2 – HDMI port DP – DisplayPort connection – Headphone connection (3.5 mm stereo jack) Fold-out hook for hanging a headset Mounting area for wall bracket Opening for Kensington®... -
Page 13: Getting Started
7. Getting started 7.1. Before connecting the monitor It is possible that your existing monitor supports a physical resolution that is not supported by your new monitor. In this case, the image on your new monitor may not appear correctly once it has been connected. ... -
Page 14: Setup
7.3. Setup Avoid glare, reflections and extreme dark-light contrasts to protect your eyes. The monitor can be placed in var- ious positions to achieve the best viewing angle: • tilt by -5° up to 20° • swivel by 30° to the left and right respectively •... - Page 15 50 - 60 cm 40 - 45° 90° • General – change position frequently (around every 20 to 30 minutes) and take regular breaks to avoid fatigue. • Back – when sitting at your workstation, your back must be supported by your chair’s backrest, which must be upright or angled slightly back.
-
Page 16: Mounting On The Wall
7.4. Mounting on the wall You can mount the device on the wall with the aid of a wall mount. DC IN HDMI 1 HDMI To enable wall mounting, first remove the device stand. To do so, remove the screws on the stand at the points indicated (A) using a Phil- lips screwdriver. -
Page 17: Connection
7.5. Connection DC IN HDMI 1 HDMI 2 To avoid damage and malfunctions, only connect the connecting cable when the monitor and computer are switched off. 7.5.1. Connecting the signal cable Plug the signal cable into one of the connections on the monitor: –... -
Page 18: Switching On/Standby
7.5.2. Connecting the headphones Plug the cable with a 3.5 mm jack plug into the stereo jack connection WARNING! Risk of hearing damage! Using headphones/earphones to listen to a device at high volumes for an extended period can damage your hearing. -
Page 19: Setting The Monitor Resolution
7.7. Setting the monitor resolution The monitor supports the physical resolutions listed in the table. The aspect ratio of the monitor is 16:9. You will get an image that is free from distortion by selecting the 1920 x 1080 pixels resolution. This is a native 16:9 aspect ratio. Image distortions or black bars at the end of the picture can occur with all other resolutions. -
Page 20: Menu
8. Menu You can use the monitor menu to make various settings. Operation takes place us- ing the multifunction button. Move the button to the right to open the menu. Select the menu by moving the button forwards/backwards. ... - Page 21 MODE Select a preset colour profile. SIGNAL SOURCE Select the picture source. ASPECT Select the aspect ratio. Switch dynamic contrast on or off. Reduces the blue value of the light and REDUCE BLUE LIGHT makes it more comfortable and warmer. Switch overdrive on or off.
-
Page 22: Energy-Saving Features
9. Energy-saving features This monitor switches to different energy-saving modes, which are specified by the respective computer/operating system. This complies with the current require- ments for reducing the energy consumption. The monitor supports the following types of energy-saving modes: Power consump- Colour of the Ready for oper- Status... -
Page 23: Incorrect Colour Reproduction; Image Is Too Bright/Dark
10.2. Incorrect colour reproduction; image is too bright/ dark • Check the colour settings in the monitor display menu or in the computer's op- erating system. 11. Cleaning • Always unplug the device and disconnect all cables before cleaning. • Do not use solvents, corrosive or gaseous cleaning agents. -
Page 24: Pixel Faults In Tft Monitors
11.1. Pixel faults in TFT monitors Despite the state-of-the-art production 5 Pixel methods, in rare cases there may be individ- ual or multiple pixel drop-outs (dead pixels) due to the highly complex technology. Rows For active matrix TFTs with a resolution of 1920 x 1080 pixels, which are each made up of three sub-pixels (red, green, blue), there Pixel... -
Page 25: Disposal
12. Disposal PACKAGING Your device has been packaged to protect it from damage in transit. The packaging is made of materials that can be recycled in an environmen- tally friendly manner. DEVICE All old devices marked with the symbol illustrated must not be disposed of in normal household waste. -
Page 26: Technical Specifications
100-240 V ~ 50/60 Hz 1.8 A Standby: < 0.5 W Power consumption Operation: < 60 W (max.) Mains adapter FSP Technology Inc. Importer: MEDION AG Manufacturer Am Zehnthof 77 45307 Essen Germany Commercial register number: HRB 13274 Model name... - Page 27 Screen Screen size 80 cm (32”), TFT with LED backlight Aspect ratio 16:9 Resolution 1,920 x 1,080 pixels Brightness 300 cd/m² (typical) Contrast 4,000:1 (typical) 21 ms (grey to grey, typical) Reaction time 1 ms (MPRT, grey to grey, typical) Connections HDMI 1, version 1.4 with HDCP 2.0 decoding (max.
-
Page 28: Product Data Sheet
In our Service-Community, you can meet other users, as well as our staff, and you can exchange your experiences and pass on your knowledge there. You will find our Service-Community at community.medion.com. • Alternatively, use our contact form at www.medion.com/contact. -
Page 29: Legal Notice
Please note that you cannot use the address below for returns. Please contact the Service Centre mentioned above. MEDION AG Am Zehnthof 77 45307 Essen Germany Importer for GB market by: MEDION AG c/o MEDION ELECTRONICS LTD. 120 Faraday Park, Faraday Road, Dorcan Swindon SN3 5JF, Wiltshire United Kingdom... -
Page 30: Privacy Statement
16. Privacy statement Dear customer, We wish to inform you that we, MEDION AG, Am Zehnthof 77, 45307 Essen, Germa- ny process your personal data as a data controller. For matters regarding data protection, we are supported by our company data pro- tection officer who can be contacted at MEDION AG, Datenschutz, Am Zehnthof 77, D –...
Need help?
Do you have a question about the ERAZER Spectator X20 and is the answer not in the manual?
Questions and answers